The Woodland Mills WC68 is a compelling 6-inch PTO wood chipper for acreage owners who already have a suitable tractor and regularly process branches and brush. Its main attraction is controlled hydraulic feeding without needing tractor hydraulic remotes. The main buying constraints are available PTO power, attachment weight and the time required to prepare awkward material.
This American Timber Equipment review combines manufacturer documentation with practical buying analysis and an embedded owner video. It is a researched editorial assessment, not an ATE hands-on test or a measured throughput comparison. Technical information checked October 22, 2026.
Quick verdict: is the Woodland Mills WC68 worth considering?
Yes, if recurring cleanup makes a powered-feed machine useful and your tractor can support it. The WC68 occupies a practical middle ground: substantial enough for regular woodlot and fenceline work, while using the tractor you already maintain. Buyers should evaluate their ordinary brush pile, access routes and storage space before focusing on its maximum branch diameter.
A six-inch rating is an upper capacity figure, not a promise that every tractor in the approved range will process every six-inch hardwood limb at the same speed. For current purchasing details, see the Woodland Mills WC68 6-inch PTO wood chipper product page. Price, availability and delivery terms should be checked there when you order.

Verified WC68 specifications
The following figures come from the official Woodland Mills WC68 product information and the 2024 WC68 operator’s manual, revision C. Match the manual to the machine’s model year before relying on service or setup figures.
| Specification | Published information |
|---|---|
| Model / SKU | WC68 / 0010298 |
| Maximum branch capacity | Up to 6 inches |
| PTO power range | 20–50 PTO horsepower |
| Restricted infeed opening | 6 × 8 inches; distinct from the larger hopper mouth |
| Feeding | Self-contained hydraulic system; adjustable roller direction and speed |
| Flywheel / knives | 24-inch diameter; four reversible hardened-steel blades |
| Discharge / storage | 360-degree chute positioning; folding infeed chute |
| Tractor hydraulic requirement | No tractor hydraulics required for the feed system |
| Machine weight, 2024 manual | 747 lb / 339 kg; confirm the supplied configuration |
| Hydraulic tank, 2024 manual | 5.3 US gal / 20 L |
Model-year distinction: older WC68 manuals list 710 lb and a 5-gallon tank. Do not use an older video or specification sheet to determine the lift requirement or fluid capacity of a newer unit. Shipping weight is also different from operating machine weight.
Video review: WC68 Wood Chipper Pros and Cons by Sawing with Sandy
Watch “Woodland Mills WC68 Wood Chipper Pros and Cons” by Sawing with Sandy for an owner’s perspective. The video is the creator’s work and is embedded from the original YouTube upload. It shows an earlier WC68, so compare visible details with current documentation.
Video credit: Sawing with Sandy via YouTube. Open the original review on YouTube.
Use the footage to evaluate the work sequence: how branches are staged, how frequently the operator trims forks, and how the tractor and chipper are positioned. A video can reveal workflow details that a specification table misses, but it does not establish a standardized production rate for your tractor or wood species. The advantages and limitations below are ATE’s editorial assessment, not quotations attributed to Sandy.
WC68 pros: where the design makes sense
Feed control can reduce repetitive handling
A controllable roller gives the operator a way to match feeding to the material and available power. For recurring brush piles, that control is more meaningful than simply having a large nominal capacity. The benefit is greatest when preparation and branch handling are a regular part of the job; it does not eliminate all trimming or the need to follow the operating instructions.
It uses an existing tractor investment
If the tractor is available during cleanup, a PTO attachment avoids adding a separate engine to your maintenance routine. That can simplify ownership for a farm or acreage operation. The self-contained feed hydraulics also remove one compatibility question for owners whose tractors lack rear remotes.
Adjustable discharge and folding storage help the overall workflow
Directing chips toward the intended collection area can reduce a second handling step. Folding the infeed chute is useful when shed space or transport clearance is limited. Measure the actual storage location and plan how you will disconnect and reconnect the attachment; convenient storage often determines how readily an owner uses equipment for smaller jobs.

WC68 cons and limitations to weigh
- Tractor dependence: chipping occupies the tractor. If the same tractor must move logs or load trailers, switching tasks can interrupt production.
- Weight and balance: adequate PTO horsepower alone does not establish a suitable match. Rear attachment load, lift geometry and required ballast need separate checks.
- Maximum-size material takes more power: Woodland Mills states that full six-inch logs at full infeed speed require over 40 PTO horsepower. A tractor at the lower end of the operating range should be assessed with realistic feed expectations.
- Hydraulic feeding adds service items: the system still needs attention to fluid, hoses and drive components. Self-contained does not mean maintenance-free.
- Branch shape still matters: a forked crown can require preparation even when its individual limbs are below the diameter rating. Do not budget labor savings solely around the largest advertised opening.
How to check tractor compatibility before buying
Start with the tractor manufacturer’s PTO output figure, rather than engine horsepower. Next check three-point lifting capacity at the relevant distance behind the linkage, required ballast, approved hitch arrangement and driveline setup. Quick-hitch compatibility is a useful feature, but the actual hitch dimensions and PTO shaft fit still need checking on your combination.
Consider where the tractor will work, including narrow access, soft ground and turning room. A machine that fits the tractor on paper may still be awkward to place beside brush piles or position near a trailer. Our PTO wood chipper compatibility guide provides a broader checklist, while the manufacturer’s manual governs setup and operation.
Ownership, maintenance and realistic running costs
Plan for knife service, lubrication, fluid checks and inspection of guards, fasteners and the driveline. Service access matters because neglected cutting components can turn a promising chipper into a slow one. Keep the correct model-year manual with the machine and use its maintenance intervals, adjustment procedures and replacement-part specifications.
Estimate value using the whole cleanup job. Include branch preparation, tractor travel, chipping, chip handling and storage time. Compare those hours with your current hauling or rental routine. Avoid assuming a fixed payback period without knowing your annual workload. The ATE wood chipper maintenance checklist is a useful planning companion.
Who should buy the WC68, and who should compare alternatives?
The strongest candidate is an acreage owner with a compatible tractor, recurring woody debris and a useful destination for the chips. Regular seasonal work can justify ownership when disposal and repeated handling consume too much time. Its appeal is the fit between tractor, feed control and workload rather than a claim that it is universally the best six-inch chipper.
Compare smaller machines if most jobs are light pruning and storage or lift capacity is tight. Consider a separate engine-driven machine if the tractor must remain available for other tasks. If you are comparing six-inch PTO options, read the WoodMaxx MX-8600 versus Woodland Mills WC68 comparison. Then check the WC68’s current price, availability and documentation at American Timber Equipment or ask ATE to review your tractor and typical material before ordering.
Frequently asked questions
How much PTO horsepower does the Woodland Mills WC68 need?
The published range is 20–50 PTO horsepower. Woodland Mills specifies over 40 PTO horsepower for full six-inch logs at full infeed speed. Use PTO output, not the tractor’s engine horsepower, when checking fit.
Does the WC68 require tractor hydraulic remotes?
No. Its feed system has its own hydraulic supply. Owners still need to maintain that system and follow the correct fluid and service instructions.
Can the WC68 process six-inch hardwood at its minimum horsepower?
Do not assume full-speed performance at the minimum power figure. Wood species, condition, shape and feed setting affect the load. Maximum diameter and productive feed speed are separate considerations.
How much does the WC68 weigh?
The 2024 revision C manual lists 747 lb (339 kg). Older manuals list 710 lb. Verify the model year, configuration and tractor lifting requirements before ordering.
Is this an ATE hands-on review?
No. This is a researched product review with a separately attributed owner video. ATE has not presented its own measured output, durability testing or numerical performance score.
Sources and review methodology
Reviewed October 22, 2026 by the American Timber Equipment Editorial Team. Technical references: Woodland Mills WC68 product page; 2024 WC68 operator’s manual, revision C, technical specifications on page 9; and older WC68 manual for model-year comparison. Owner video: Sawing with Sandy’s original YouTube review.
ATE sells this product. Our buying judgments are editorial analysis of the documented design and ownership tradeoffs. The video creator’s opinions remain their own. Specifications can change; confirm critical requirements for the supplied unit. Read ATE’s Editorial Standards & Research Methodology.