Specification-based editorial analysis by American Timber Equipment, checked November 3, 2026. This is not a hands-on test. Recommendations describe likely workflow fit and require confirmation for the actual equipment combination.
Two processing approaches, not just two model sizes
WP1840 and WP875 solve different versions of the firewood job. WP1840 brings the saw into a powered processing platform with a folding live deck. WP875 uses a winch-processor arrangement and a separate chainsaw cutting workflow. The sensible comparison begins with what the operator currently spends time doing: staging logs, handling the saw, splitting, managing the discharge or moving equipment. The better model is the one that addresses the expensive constraint in that whole sequence.
This matters because the model numbers can suggest a straightforward larger-versus-smaller hierarchy. The published capacities contradict that shortcut. WP875 permits a larger maximum incoming diameter and offers a longer split opening, while WP1840 provides more integrated cutting and staging. A buyer can gain automation in one part of the job while accepting a tighter material envelope elsewhere.

What the specifications change in practice
The diameter difference is eighteen inches for WP1840 against twenty-two inches for WP875. WP875's thirty-six-inch split opening also differs from WP1840's twenty-six-inch opening. Split opening is not the same as incoming stem length or a universal promise about finished-piece length. Match the actual processing sequence to the intended firewood, especially if the business supplies longer heating pieces or receives a significant share of larger timber.
WP1840 lists a thirty-seven-horsepower EFI engine, hydraulic saw and twenty-ton split force. WP875 lists fourteen horsepower and twenty-five-ton split force. Higher engine power does not mean every subsystem has a higher rating. The engine supports the particular machine architecture, including cutting on WP1840. Compare each published specification on its own terms instead of turning engine horsepower or split tonnage into a single ranking of overall processing ability.
Verified specifications
WP1840
Source: official manufacturer model page, retrieved November 3, 2026. Listed output and cycle times are manufacturer claims, not independent test results.
| Specification | Published value |
|---|---|
| Maximum Log Diameter | 18" |
| Split Opening | 26" |
| Split Force | 20 Ton |
| Engine | Vanguard® 37 hp EFI |
| Average Cut to Cut Cycle Time | 12 Seconds |
| Full Stroke Splitting Cycle Time | 6.5 Seconds |
| Recommended Log Diameter | 16" |
| Maximum Log Length | 192" |
| Log Deck Type | Folding Two-Stage Live Deck |
| Saw Drive | Hydraulic Gear Motor |
| Throughput | Up to 3.5 Cords Per Hour |
| Total Weight | 3700 lbs |
| Dimensions Open (LxWxH) | 232" x 114" x 76" |
| Dimensions Folded (LxWxH) | 232" x 66" x 105" |
| Included Conveyor | None |
WP875
Source: official manufacturer model page, retrieved November 3, 2026. Listed output and cycle times are manufacturer claims, not independent test results.
| Specification | Published value |
|---|---|
| Maximum Log Diameter | 22" |
| Split Opening | 36" |
| Split Force | 25 Ton |
| Engine | Vanguard® 14 hp |
| Discharge Chute Height | 54" |
| Full Stroke Splitting Cycle Time | 12.1 Seconds |
| Throughput | Up to 2 Cord Per Hour |
| Winch Pulling Capacity | 1550 lbs |
| Total Weight | 2275 lbs |
| Dimensions Open (LxWxH) | 246" x 69" x 66" |
| Dimensions Folded (LxWxH) | 125" x 73" x 79" |
| Splitter Valve Operation | Auto Cycle |
Log staging and saw work decide the layout
A live-deck yard needs a workable way to load and stage timber, with room for the processor's working footprint. That arrangement is most appealing when deliveries can be organized and the deck remains supplied. WP875's winch arrangement offers another way to bring timber into position, but the operator's separate saw work remains part of the job. Ask to observe the real cutting sequence, not only the splitter moving through its stroke.
Discharge planning also differs from simply comparing machine price. The base WP1840 includes no conveyor, so its receiving system must be specified separately or through a conveyor package. WP875 lists a discharge chute height, which does not itself guarantee compatibility with a given container. Draw the intended receiving arrangement for each model and include whatever equipment is needed to keep finished wood from interrupting production.
Compare a working hour, not isolated cycle numbers
Wallenstein lists output up to 3.5 cords per hour for WP1840 and up to two for WP875. Those are manufacturer claims under conditions not independently tested here. They are useful prompts for a demonstration, not dependable business forecasts. Define the volume measurement, include timber preparation and record accepted finished wood over a representative work period with normal interruptions.
The full-stroke splitting figures also describe different machines and stroke lengths. WP1840 lists 6.5 seconds and WP875 lists 12.1 seconds, but that comparison does not include every step needed to make a saleable piece. A shorter isolated action may not control the production line. Watch whether the operator waits on timber, the saw, the splitter, the loader or the receiving area, then judge which machine actually reduces the dominant delay.
Strengths and limitations of each choice
WP1840's advantages are integrated cutting and staged deck handling. Its main limitations in this comparison are the smaller diameter envelope, a planned discharge requirement and a substantial operating footprint. It is strongest where the operation can support a processing station with consistent feed and output handling. More integration also means the owner must maintain a saw system as part of the processor rather than treating cutting as a separate tool.
WP875's strengths are larger rated diameter, a long split opening and a winch-processor workflow that may suit an owner's existing cutting practice. Its limitations include retaining the separate chainsaw task and a lower advertised maximum output figure. Its longer bed also deserves a clearance check. Neither list predicts reliability or service cost; those questions require current manuals, service information and an itemized supply proposal.
Why conveyor and transport choices belong in the comparison
A fair WP1840 quotation needs to identify whether it is the base machine, the twelve-foot integrated-conveyor package or the twenty-four-foot conveyor package. Compare the configuration that will actually perform the job. A bare processor price alongside a working winch setup would hide some of the required equipment. Conversely, an expensive conveyor package should not be assumed necessary if a compatible discharge system already exists.
For transport, use configuration-specific figures. WP875's published weight is 2,275 pounds; WP1840's web table gives 3,700 pounds with an inconsistent metric equivalent. Those values are not complete loaded-combination approvals. Verify tongue loads, actual package mass, supplied conveyor arrangement and towing suitability. The footprint and setup time may matter as much as towing weight when the work involves frequent moves between constrained sites.

A decision exercise for the buyer
Count the regular logs that exceed eighteen inches but remain within twenty-two. Then record the share of labor spent on separate saw work and timber staging. If oversize handling is frequent, WP1840 could leave a large secondary workload despite its integrated architecture. If nearly all logs fit and saw handoffs dominate the day, integrated cutting may be the more valuable change. Those are operational inferences to validate in a demonstration.
Use the same timber sample and finished-firewood specification for both demonstrations. Include an awkward stem, a receiving-container change and normal operator movements. For American firewood businesses, output accepted by customers is a better purchasing measure than cycles completed. Compare the whole working system and the host or loader resources it consumes, then request current commercial details without assuming listed inquiry products are stocked or authorized for sale.
Frequently asked questions
Which accepts larger logs?
WP875 lists twenty-two inches maximum diameter; WP1840 lists eighteen inches. Confirm shape and material restrictions in the current manuals.
Does WP875 have the same integrated saw?
No. Its separate chainsaw workflow differs from WP1840’s built-in hydraulic saw. Include the saw and operator task in the comparison.
Which splits with more force?
The published figures are twenty-five tons for WP875 and twenty tons for WP1840. That single rating does not establish overall hourly output.
Which WP1840 package is being compared?
This article uses the base WP1840, which lists no included conveyor. Compare the conveyor variants separately if the intended job requires one.
Which model would we choose?
We would favor WP1840 for a supported yard workflow with suitable eighteen-inch-and-under timber and a clear reason to integrate sawing. We would favor WP875 when its larger diameter allowance and long split opening better serve the supply and product mix. The deciding evidence should be representative output, handling time and configuration fit. Neither the larger model number nor the higher advertised output ceiling is sufficient on its own.
Product details and inquiry
Explore WP1840 product details and WP875 product details and the American Timber Equipment firewood processor collection. WP1840-12 product details and WP1840-24 product details provide conveyor-package context.
Use the product inquiry route to request configuration confirmation and commercial details. Dealer approval and pricing remain pending. This article does not assert current stock, authorized-dealer status, sale eligibility, a delivery date or a current price. Confirm the responsible supplier, included equipment and terms before making a commitment.
Sources and review method
Primary and comparison sources: WP1840 manufacturer product information; WP875 manufacturer product information, retrieved November 3, 2026. The current Shopify catalog supplied the verified internal destinations; the live inventory of 343 prior articles was checked for duplicate topics before drafting.
Published specifications are distinguished from our workflow analysis. No independent performance measurement, customer rating or field-test result is claimed. Existing manufacturer catalog photos are reused under the store owner’s prior confirmation of permission. This is owner-confirmed reuse permission, not an assertion of dealer authorization or independent verification of a manufacturer licence. Catalog media-rights-pending tags remain unchanged. Captions identify alternative and representative imagery. Follow current manuals and qualified supplier guidance for operation.